![background image](http://html1.mh-extra.com/html/insportline/in-2206/in-2206_manual_2069020077.webp)
ASSEMBLY INSTRUCTIONS
1. Install the Front/Rear Stabilizers.
Attach the Front Stabilizer (10) onto the front curve
plate of the Main Frame (1) with two M10x57 Bolts
(12), Ø10 Big Curve Washers (14), and M10 Cap
Nuts (15).
Attach the Rear Stabilizer (11) onto the rear curve
plate of the Main Frame (1) with two M10x57 Bolts
(12), Ø10 Big Curve Washers (14), and M10 Cap
Nuts (15).
2. Install the Front Post and
Tension Control
Knob.
Remove six M8x16 Bolts (41), Ø8 Spring Washers
(60), and Ø20xØ8 Curve Washers (42) from the tube
of the Main Frame (1).
Insert the Tension Cable (30) through into the bottom
hole of Front Post (5) and pull it out from the square
hole of Front Post (5). Connect the Sensor Wire II
(68) from the Main Frame (1) to the Sensor Wire I
(67) from the Front Post (5).
Insert the Front Post (5) onto the tube of the Main
Frame (1) and secure with six M8x16 Bolts (41), Ø8
Spring Washers (60), and Ø20xØ8 Curve Washers
(42) that were removed.
Remove the Ø20xØ5.2 Curve Washer for Tension
Control Knob (64) and M5x25 Bolt for Tension
Control Knob (65) from the Tension Control Knob
(54). Put the cable end of resistance cable of
Tension Control Knob (54) into the spring hook of
Tension Cable (30) as shown in drawing A of figure
2. Pull the resistance cable of Tension Control Knob
(54) up and force it into the gap of metal bracket of
Tension Cable (30) as shown in drawing B of figure
2. Attach the Tension Control Knob (54) onto the
Front Post (5) with the Ø20xØ5.2 Curve Washer for
Tension Control Knob (64) and M5x25 Bolt for
Tension Control Knob (65) that were removed.
3. Install the Right/Left Handrail Arms, Right/Left
Foot Bars, Right/Left Foot Pedals, and
Foot
Bar Covers-A/B.
Remove two M10x18 Bolts (43), Ø18xØ10x2 Spring
Washers (44), and Ø28x5 Washers (45) from the left
and right horizontal axes of the Front Post (5). Then
attach the Left Handrail Arm (3L) onto the left
horizontal axis of the Front Post (5) with one M10x18
Bolt (43), Ø18xØ10x2 Spring Washer (44), and
Ø28x5 Washer (45) that were removed. Install a
S16 Cap (49) onto the M10x18 Bolt (43).
Attach the left U-Shape Bracket (23) to the left Crank
(78) with one 1/2” Bolt for left U-Shape Bracket
(16L), Ø28xØ17x0.3 Wave Washer (18), Ø20 Spring
Washer (20), and 1/2” Left Nylon Nut (17L). Install a
4R
3R
5
3L
4L
50
48
52L
53L
55
55
3L
5
4L
47
52R
4R
3R
47
48
50
62
57
67
56
53R
5
62
62
4R
4L
6
4
5
6
66
2L
28
27
29
31
66
33L
33R
10
12
14
15
1
15
14
15
14
15
14
12
3R
51
45
3L
43
44
49
5
16L(R)18
17L(R)
1
5
54
54
30
30
30
60
60
64
65
68
67
41
42 41
11
54
30
36
20
26
B
A
(37)
78
1
2
3
Summary of Contents for IN 2206
