![background image](http://html1.mh-extra.com/html/insportline/in-2206/in-2206_manual_2069020079.webp)
TROUBLE SHOOTING GUIDE
3. Verify that all the bolts and nuts are locked properly and the turning parts should be
turned freely without damaged parts.
4. Clean the equipment with soap and slightly damp cloth only. Please do not use any
solvent to clean the equipment.
WARM UP AND COOL DOWN ROUTINE
A good exercise program consists of a warm-up, aerobic exercise, and a cool down. Do the
entire program at least two to three times a week, resting for a day between workouts. After
Problem
Potential Cause
Corrections
Base is unstable.
3. Floor is not flat or there is
small object under the front
or rear stabilizer.
4. The rear stabilizer end caps
on the rear stabilizer have
not been leveled when
adjusting.
3. Remove the object.
4. Adjust the rear stabilizer end
caps.
Handrail is
shaking.
The bolts are loose.
Tighten the bolts.
Loud noise from
the moving parts.
The interval of the parts is
improper tighten.
Open the covers to adjust.
No resistance
when riding the
elliptical trainer.
5. The interval of the magnetic
resistance increases.
6. Tension control knob is
damaged.
7. Belt slips.
5. Open the covers to adjust.
6. Change the tension control
knob.
7. Open the covers to adjust.
Summary of Contents for IN 2206
