background image

COPYRIGHT 2007 - 2013, ACCELERATED CARE PLUS CORP., ALL RIGHTS RESERVED 

CONFIDENTIAL AND PROPRIETARY 

 

OMNICYCLE

®

 

Active–Assisted Rehabilitation System 

User Manual 

Revised 05.14.2013 

Part No. 29006005 Rev 3 

 
 

This Manual contains confidential and proprietary information owned by Accelerated Care Plus ("ACP") which is protected by copyright.  This 
Manual or any portion thereof may not be photocopied, reproduced or translated to another language without the express prior written consent of 
ACP.  This Manual may only be used by entities who have purchased the equipment or have implemented the ACP program and are covered by 
an executed Lease Agreement with ACP containing a Confidentiality Agreement, which is incorporated by reference in its entirety.  This Manual 
may not be used for any other purpose. 
 
Any additional copies of the Manual shall be ordered from ACP.  No changes or modifications shall be made to the Manual without prior review 
and written authorization from ACP.  No authorization is given to market, sell, disclose, or exploit this Manual except as for purposes of using the 
Equipment as contemplated by the Lease Agreement. 
 
ACCELERATED CARE PLUS MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MANUAL, INCLUDING, BUT NOT 
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Accelerated 
Care Plus shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance 
or use of this Manual.  
 
The information contained in this document is subject to change without notice. 

Summary of Contents for ACP OMNICYCLE 01034-000











































Reviews: