18
Insignia NS-F20TR 20" Flat Tube TV/DVD/VCR Combo
www.insignia-products.com
4
Press the
SETUP
button to close the menu.
5
Press the
PLAY
button to start playback.
Automatically repeating playback
You can play a videotape indefinitely.
To automatically repeat a tape:
1
Press the
SETUP
button.
2
Press the
or
button to select
USER’S
SET UP
, then press the
ENTER
button.
3
Press the
or
button to select
REPEAT
PLAY
, then press the
ENTER
button one or
more times to select the repeat mode you
want. You can select:
•
ALL
–Repeats the entire tape.
•
BLANK
–Repeats the tape from the
beginning to the first blank section of the
videotape that is more than 10 seconds
long.
•
OFF
–Cancels repeat play.
4
Press the
SETUP
button to close the menu.
5
Press the
PLAY
button to start playback.
Marking a starting point on a videotape
You can mark a beginning point on a videotape
where you want playback to start.
To mark a playback starting point:
1
Rewind or forward the videotape to the point
where you want playback to start.
2
Press the
CLEAR
button one or more times
until the counter is set to
0:00:00
.
3
Press the
PLAY
button to start playback or
the
REC
button to start recording.
4
Press the
STOP
button when playback or
recording is complete.
5
Press the
SETUP
button.
6
Press the
or
button to select
ZERO
RETURN
, then press the
ENTER
button. The
videotape begins rewinding and stops when
the counter reaches
0:00:00
.
7
To cancel rewinding, press the
STOP
button.
Searching forward or backward
To search forward or backward on a
videotape:
1
During playback, press the
SKIP/REW
button to search backward on a videotape.
Press the
FWD/SKIP
button to search
forward on a videotape. When you are
searching, the sound is muted.
2
Press the
SKIP/REW
or
FWD/SKIP
button to search at high speed (LP and SLP
modes only).
3
Press the
PLAY
button to resume normal
playback.
Searching by specifying a time
You can search on a videotape by entering the
amount of time you want to skip before playback
begins.
To search by specifying a time:
1
Press the
SETUP
button.
2
Press the
or
button to select
TIME
SEARCH
, then press the
ENTER
button.
3
Press the
or
button one or more times
to select the amount of playback time you
want to skip. You can select as much as
9 hours and 50 minutes in 10 minute
increments.
4
Press the or button to rewind or forward
the videotape to the specified point. The time
counts down during the search. When the
counter reaches
0:00:00
, playback starts
automatically.
5
To canel the search, press the
STOP
button on the remote control or
STOP/EJECT
button on the front of your
TV combo.
Searching with index markers
Every time you start recording, your TV combo
adds an index marker to the videotape. If you
record on a videotape, then stop recording,
when you start recording again, another index
marker is added to the tape.You can use the
index markers to find the start of a recording.
Note
Your TV combo saves this setting even if you turn
off your TV combo.
Note
If the rental mode is set to ON, RENTAL appears
even if you are using REPEAT mode.
Note
This feature does not work with blank videotapes
or blank sections of a videotape.
Note
Videotapes recorded in SP or LP mode normally
display a noise bar during high speed searching
and the picture may be black and white.
Note
To cancel the search and close the menu at this
point, press the
SETUP
button.
Note
•
If you pause the videotape during a recording,
no index marker is added.
•
In some cases, an index marker at the
beginning of a tape cannot be detected.
•
For recordings in SP mode, the time gap
between index markers must be at least one
minute.
•
For recordings in LP mode, the time gap
between index markers must be at least two
minutes.
•
For recordings in SLP mode, the time gap
between index markers must be at least three
minutes.
NS-F20TR_ENGLISH.fm Page 18 Thursday, January 11, 2007 4:22 PM
