17
Insignia NS-F20TR 20" Flat Tube TV/DVD/VCR Combo
www.insignia-products.com
Changing your password
To change your password:
1
Make sure that you are in TV/VCR mode by
pressing the
INPUT
button.
2
Press the
SETUP
button.
3
Press the
or
button to select
V_CHIP
SET UP
, then press the
ENTER
button.
4
Enter your password with the number
buttons. The default password is 0000. For
first time setup or if the power fails, use the
default password.
5
Press the
or
button to select
CHANGE
PASSWORD
, then press the
ENTER
button.
6
In the
NEW PASSWORD
box, enter your
new password with the number buttons, then
enter your new code again in the
CONFIRM
PASSWORD
box.
7
Press the
SETUP
button to close the menu.
Using the VCR
Your TV combo can play any videotape that has
the
VHS
mark. Use high quality tapes. Avoid
using poor quality or damaged tapes.
You can play videotapes recorded in SP
(standard play mode), LP (long play mode), and
SLP (super long play mode).
Playing a videotape
To play a videotape:
1
Insert a pre-recorded videotape into the
videotape compartment. Your TV combo
turns on automatically.
2
Make sure that your TV combo is in TV/VCR
mode by pressing the
INPUT
button. The
TV/VCR indicator lights on the front of your
TV combo.
3
Press the
PLAY
button to start playback.
4
To stop playback, press the
STOP
button.
5
To rewind the videotape, press the
SKIP/REW
button. To fast-forward the
videotape, press the
FWD/SKIP
button.
To stop rewinding or fast-forwarding, press
the
STOP
button.
6
To eject the tape, press the
STOP/EJECT
button on the front of your
TV combo.
Adjusting the tracking
Your TV combo automatically adjusts the
tracking when you start playback. If you see
noise lines (black and white streaks) on the
screen, you can manually adjust the tracking.
To manually adjust the tracking:
1
While the videotape is playing, press the
CH
or
CH
button until the streaks
disappear. This feature works during normal
playback and in pause, still, and stop modes.
2
To stop manual tracking, stop playback, then
start playback again.
Freezing the picture
To freeze the picture:
1
During playback, press the
PAUSE•SLOW
button.
You can advance the picture one frame at a
time by pressing the
PAUSE•SLOW
button.
2
To resume normal playback, press the
PLAY
button.
Playing a videotape in slow motion
To play a videotape in slow motion:
1
During playback, press the
PAUSE•SLOW
button, then press the
FWD/SKIP
button.
2
To resume normal playback, press the
PLAY
button.
Automatically rewinding and ejecting
When the end of a videotape is reached during
recording, playback, or fast-forwarding, your
TV combo automatically rewinds and ejects the
tape, then turns off.
Your TV combo does not automatically rewind
and eject a videotape during repeat play or at
the end of a scheduled recording or OTR
(one-touch recording).
Improving picture quality
You can improve picture quality when playing
worn videotapes, such as rental tapes.
To improve picture quality:
1
Press the
SETUP
button.
2
Press the
or
button to select
USER’S
SET UP
, then press the
ENTER
button.
3
Press the
or
button to select
RENTAL
,
then press the
ENTER
button to select
ON
.
Note
If your TV combo is in DVD mode, you can start
playback by pressing the
PLAY
button on the
VCR side (right) of the front of your TV combo.
Note
If your TV combo is in freeze mode for more than
five minutes, it goes into stop mode.
Note
If your TV combo is slow motion mode for more
than five minutes, it goes into stop mode.
Note
Your TV combo saves this setting even if you turn
off your TV combo.
Note
To turn off this feature, select
OFF
.
NS-F20TR_ENGLISH.fm Page 17 Thursday, January 11, 2007 4:22 PM
