42
Please follow the basic safety instructions below when using InfoView or any
other electronic equipment. This will reduce, if not eliminate the risk of
electric shock, fire or injury. Please read this section thoroughly before
proceeding in your installation of InfoView.
1.
5
DO NOT
place this product near water to prevent electric shock.
2. Open areas on the InfoView are meant for ventilation to prevent overheating.
5
DO NOT
seal off InfoView tightly or place it in a condition which might block
proper ventilation.
5
DOT NOT
place InfoView near equipment which generates
heat, for example: radiator.
3. Please ensure that the InfoView unit is securely placed, so that it will not fall
accidentally, which may affect the performance of the unit.
4. When connecting the InfoView unit with power cords, place the power cord in a
visible area so that no one will trip over it.
5
DO NOT
place anything on top of
the power cord.
5.
5
DO NOT
place flammable materials like lighter fluid, etc. on the product.
6. Switch off the power and unplug the InfoView unit from the wall phone jack
when you want to clean the unit. You may use a lightly damp, soft cleaning cloth
to clean surfaces on InfoView.
5
DO NOT
use liquid cleaner or aerosol cleaner
for cleaning.
7.
5
DO NOT
overload the wall power circuit by connecting too many items to it.
This may increase the risk of fire or electric shock due to overloading.
When you encounter a problem using the InfoView, please contact your authorized
dealer or call the technical support number indicated in your product warranty card.
5
DO NOT
open up the unit for inspection because this will void your warranty.
Chapter
10
Important Safety Instructions
