38
During InfoView Set-Up:
❏
My phone jack is located very far away from my TV.
■
We have provided two phone cables for you to set up InfoView effectively. You
can use the 8 meters (24 feet) phone cable to connect your InfoView to your
phone jack, and the 5 meters (15 feet) phone cable to connect your phone to the
InfoView. If the cable is not long enough, please purchase a longer phone cable.
❏
Can I use a cordless phone so that I don’t have to use a long cable ?
■
Yes, InfoView will work fine with most cordless phones. As long as the phone can
send out a clear signal to activate InfoView for different functions, both will work
fine.
During InfoView Connection:
❏
I pressed the
2
key but it did not activate the on-screen menu, what should I do?
■
You need to use a touch-tone phone together with your InfoView. Most phone
today allow you to switch between the TONE and PULSE mode, please check your
phone and make sure it is set to the TONE mode.
❏
I turned ON the InfoView set, but I did not see anything on my TV screen, what
should I do?
■
Did you set your TV into video receiving mode? Video receiving mode is the same
mode your TV is in when you are watching video via VCR. Please switch your TV
to the video mode, and you should be able to see your self-view screen on the TV
Please check your connection to make sure the cables are connected correctly as
shown in Chapter 4.
Chapter
9
Troubleshooting and Usage Page
Symptom
❏
Solution
■
