54
VIEW 5 Pro
730
VIEW
1. Press Utility key;
2. Select the "coon" setting menu;
3. Confirm;
4. Select the Ethernet communication mode;
5. Confirm;
6. Select execution of network communication or end of network communication;
7. Confirm;
8. Exit and close the Ethernet setting menu.
Follow the above steps 1~5 to enter the Ethernet setting menu. When "BIND" is selected in step 6, it enters the execution
interface, and Display Bar C displays "EXEC". Press "Enter" key to confirm the execution of network communication
function, and the interface jumps to "END" display.
When "BIND" is directly selected in step 6, the system ends the Ethernet setting. After the setting is completed, the
instrument returns to the previous menu to display.
Description
Only after execution, the IP address, gateway address and subnet mask set above will take effect, otherwise the settings
will not take effect.
8.4.5 Execution and end of Ethernet
Operating steps
