53
730
VIEW
8.4.4 Setting of subnet mask
Operating steps
1. Press Utility key;
2. Select the "coon" setting menu;
3. Confirm;
4. Select the Ethernet communication mode;
5. Confirm;
6. Enter to the Ethernet subnet mask setting;
7. Confirm;
8. Set the first two segments of subnet mask (Display C);
9. Confirm;
10. Set the last two segments of subnet mask (Display D);
11. Confirm.
Follow the above steps 1~7 to enter the setting interface of Ethernet subnet mask address. Display Bars C and D are used
to set the first 2 segments and the last 2 segments of subnet mask address respectively. Set the subnet mask address with
navigation (up, down, left and right) keys. After setting the Display Bar C, press "Enter" key to enter the column D. After the
setting is completed, the instrument returns to the previous menu to display.
Description
The default subnet mask address of the instrument is 000.000.000.000, and the setting range is 000.000.000.000~255.255.2
55.255.
Initialization settings do not reset the subnet mask address.
