41
730
VIEW
1. Press the Set/Reset key;
2. Select the integral timer setting menu;
3. Confirm;
4. Set the hour (Display B);
5. Confirm;
6. Set the minute (Display C);
7. Confirm;
8. Set the second (Display D);
9. Confirm;
10. Exit and close the setting menu.
Follow the above steps 1~3 to enter the timer setting interface, and the setting cursor will be displayed in Display Bar B.
When setting with navigation keys, press "Enter" to confirm, switch the setting cursor to Display Bar C to set the minute,
confirm it again, and then switch the setting cursor to Display Bar D to set the second. After the hour, minute and second
are set, press "Enter" again. The instrument returns to the previous menu to display, and press "Hold/ESC" key to exit the
setting interface.
Setting range of integral timer: 00:00:00~10000:00:00. The setting time of the actual integral timer is related to the data
update rate, and must be greater than or equal to the update rate cycle, otherwise the setting is invalid.
6.3 Setting of Integral Timer
Operating steps
6.4 Setting of Integral D/A Timer
Operating steps
