Inlog EDAM-4200 Series, User Manual, Page: 83 / 170

EDAM-4200 Series User’s manual Version 1.03
8.3 ASCII Command Set
8.3.1 General commands
Command Function Description Modules Pg.
$AAM Read Module Name Returns the module name from a specific
module All 86
$AAF Read Firmware Version Returns the firmware version from a specific
module. All 87
$AAID Read module ID Read user define module address(ID)
(for tcpdaq.dll driver)
All
88
$AAIDFF Set Module ID number Set user define module address(ID)
(for tcpdaq.dll device driver). All
89
$AAMD(data) Write module description Write module description(max 30 characters) All
90
$AAMD Read module description Read module description All 91
$AAS1 Reloads the module
factory default Reloads the module factory default All 92
~AAI Soft INIT* command
(Enable) Soft INIT* command (Enable)
All 93
~AATNN Sets the soft INIT* timeout
value Sets the soft INIT* timeout value All 94
$AARS Reboot the module Reboot the module to the power-on state All 95
$AA5 Reads the Reset Status of a
module Reads the Reset Status of a module All 96
~AADNNNNN Set timout to search DHCP Set timout to search DHCP All 97
~AAD Read timout to search
DHCP Read timout to search DHCP All 98
^AAMAC Read MAC address Read MAC address All 99
8.3.2 Digital I/O commands
Command Function Description Modules Pg.
$AACONNDD Set a single DO mode for
channel N Set a single DO mode for channel N All 100
$AACONN Read a single DO mode
for channel N Read a single DO mode for channel N All 101
$AACINNDD Set a single DI mode for
channel N Set a single DI mode for channel N All 102
$AACINN Read a single DI mode
for channel N Read a single DI mode for channel N All 103
~AADSMN Set DI/O active state Set digital input/output active state All 104
~AADS Read DI/O active state Read digital input/output active state All 105
$AA6 Read DI/O Channel
Status Read the status of all DI(0~15) and DO(0~15)
channels. (Same as “@AA”) All 106
@AA Read DI/O Status Read the status of all DI(0~15) and DO(0~15)
channels. (Same as “@AA6”) All 107
#AA00DD Write DO channels(0~7) Write a value to digital output channels(0~7) All 108
#AA1NDD Set a single DO channel Set a single digital output channel All 109
@AA6DDDD Write DO channels Write a value to digital output channels(0~15) All 110
@AA6ONSS Set a single DO channel Set a single digital output channel(0~15) All 111
@AA6ON Read single digital Read a single digital output for channel (0~15) All 112
Printed Date: 27 February 2018
83