EDAM-4200 Series User’s manual Version 1.03
41548~41563
Monitored state of DI(0~15) in
DO(x) Sync operation ,
(16 DO channels, 16 bits/channel.)
= 0 - when DI(n) is inactivated
= 1 - when DI(n) is activated
Example:
(41548) for Monitored state of DI(0~15) in DO(0) Sync operation ,
(41549) for Monitored state of DI(0~15) in DO(1) Sync operation ,
3,6,16 R/W
41564~41579
DI mask pattern in DIO Sync operation , (16 DO channels, 32 bits/channel)
Example:
(41564) for DI(0~15) mask pattern in DO(0) Sync operation.
bit = '1' or '0' - indicate DI channel state to be monitor(16 bits/channel).
(41565) for DI(0~15) mask pattern in DO(1) Sync operation(16 bits/channel).
= 1 - Enable DI(n) to be monitored
= 0 - Don’t care.
3,6,16 R/W
41580~41595
DIO SYNC mode, DO(x) active output state and Enable/disable
auto run when power-on for DO channel N. (16 DO channels, 16 bits/channel.)
bit(1.0): DIO Sync. operation mode
=02 - DI match DO latch mode
=03 - DI mismatch DO latch mode.
bit(2) : Enable/disable DIO Synchronization operation when power-on.
= 0 - Disable.
= 1 - Enable.
bit(3) : digital output state when DI input value match(or not) DI mask pattern
=0 - Inactive state
=1 - Active state
=2 – Toggle
bit(4) : write DO to local module or remote module when DIO sysnc active.
= 0 - Local Mode, (Local DI->Local DO)
= 1 - remote Mode,(Local DI->Remote DO)
bit(15~5): Don’t care
3,6,16 R/W
41596~41611
DI
Pre-debounce time
of DIO SYNC . DI match /mismatch DO toggle mode.
(16 channels, 16 bits/channel.)
DI Pre-debounce time when DI value match DI mask pattern:
=0x 0000 ~ 0xFFFF ms.
3,6,16 R/W
41612~41627
DI Post-debounce time of DIO SYNC . DI match /mismatch DO toggle mode.
(16 channels, 16 bits/channel.)
DI Post-debounce time when DI value match DI mask pattern:
=0x 0000 ~ 0xFFFF ms.
3,6,16 R/W
41628~41643
DI Pre-debounce time of DIO SYNC . DI match /mismatch DO lacth mode.
(16 channels, 16 bits/channel.)
DI pre-debounce time when DI value match/mismatch DI mask pattern.
=0x 0000 ~ 0xFFFF ms.
3,6,16 R/W
Digital output channel delay output mode command sets
Address
Item
Func.
Attrib.
41644~41659
Set DO channel Low to High delay output time (0x0001~0x3332, unit:
0.5ms)
.
(16 DO channels, 16 Bits/channel).
3,6,16
R/W
41660~41675
Set DO channel High to Low delay output time (0x0001~0x3332, unit:
0.5ms)
.
(16 DO channels, 16 Bits/channel).
3,6,16
R/W
Printed Date: 27 February 2018
149