EDAM-4200 Series User’s manual Version 1.03
8.4.34
$AAYMNDDDDDDDD
Set DIO Sync. remote device IP for DO channel N
Description: Set remote device IP for DO channel N (for DIO sync. mode)
Command:
$AAYMNDDDDDDDD [CHK](cr)
Syntax:
$
Command leading code
AA
Module address ID (01 to FF , Always 01)
YM
command to set DI mismatch/DO latch mode of Auto DIO Sync.
N
Mirrored DO channel number (hex 0~F).
DDDDDDDD
IP number(hex). (Ex: IP 192.168.0.122 = C0A8007A)
(IP= 0xFFFFFFFF(255.255.255.255) for all remote modules)
CHK
Check sum
(cr)
Carriage return
!AA [CHK](cr)
Valid command
?AA[CHK](cr)
Invalid command
!
Delimiter for valid command
?
Delimiter for invalid command
Response:
AA
Module address ID
CHK
Check sum
(cr)
Carriage return
Example:
Set DIO Sync. Remote device IP(0xC0A8007A/192.168.0.122) for DO channel 0.
command:
$01YM0C0A8007A (cr)
response:
!01(cr) ; valid
Related command:
$AACONNDD, @AA6ONSS, $AAY6MRCS, $AAY6MC, $AAY6MS, $AAYM5CRPHHHHLLLL (data),
$AAYM5CRPSTTTT(data), $AAYM6CRPSTTTT(data)
Printed Date: 27 February 2018
119