EDAM-4200 Series User’s manual Version 1.03
8.4.8
~AAI
Set the Soft INIT*
Description: The Soft INIT* command is used to enable modification of the IP, Gateway and communication
protocol settings using software only.
Command:
~AAI [CHK](cr)
Syntax:
~
Command leading code
AA
Module address ID (01 to FF , Always 01)
I
command to set the Soft INIT* enable
CHK
Check sum
(cr)
Carriage return
Response:
!AA [CHK](cr)
Valid command
?AA[CHK](cr)
Invalid command
!
Delimiter for valid command
?
Delimiter for invalid command
AA
Module address ID
CHK
Check sum
(cr)
Carriage return
Example :
1.
Sets the soft INIT* timeout value of module 01 to 16 seconds and returns a valid response.
Command: ~01T10(cr)
Response: !01(cr)
2.
Sets the soft INIT* enable and returns a valid response.
Command: ~01I(cr)
Response: !01(cr)
3.
Reloads the module factory default
Command: $01S1(cr)
Response: !01(cr)
Related command:
~AATnn, $AAS1
Printed Date: 27 February 2018
93