Inlog EDAM-4200 Series User Manual Download Page 88

Page: 88 / 170

EDAM-4200 Series User’s manual Version 1.03

8.4.3

$AAID

Read module ID number

Description: Read user define module address(ID). (for tcpdaq.dll device driver)
Command:

$AAID[CHK](cr)

Syntax:

Command leading code

Module address ID (01 to FF , Always 01)

is the ID command.

CHK

Check sum

(cr)

Carriage return

Response:

!AANN[CHK](cr)

Valid command

?AA[CHK](cr)

Invalid command

Delimiter for valid command

Delimiter for invalid command

Module address ID

represents the ID number of the module.

CHK

Check sum

(cr)

Carriage return

Example:

The command requests the system at address 01h to send its ID number. The system responds with ID number

10(0AH).
Command: $01ID (cr)
Response: !010A (cr)

Related command:

$AAIDFF

Printed Date: 27 February 2018

Summary of Contents for EDAM-4200 Series











































































































































































Search results

Summary of Contents for EDAM-4200 Series

Reviews:

Inlog EDAM-4200 Series, User Manual, Page: 88 / 170

Search results

Summary of Contents for EDAM-4200 Series

Reviews: