EDAM-4200 Series User’s manual Version 1.03
8.4.18
$AACINN
Read a single DI channel mode
Description: Read a single DI channel mode
Command:
$AACINN [CHK](cr)
Syntax:
$
Command leading code
AA
Module address ID (01 to FF , Always 01)
CI
command for read a single DI mode for channel N
NN
Channel number (00~1F)
CHK
Check sum
(cr)
Carriage return
Response:
!AADD [CHK](cr)
Valid command
?AA[CHK](cr)
Invalid command
!
Delimiter for valid command
?
Delimiter for invalid command
AA
Module address ID
DD
DI mode setting (2 characters),
bit(2,1,0) - DI mode setting.
= 0x000 - Direct DI input
= 0x001 - Counter Mode
= 0x010 - Low to high latch
= 0x011 - High to low latch
= 0x100 - Input frequency mode
bit(5,4,3) - always 0,
bit(6) - DI counter H/L width filter (Default H/L width =5ms)
= 0 - disable (off).
= 1 - enable (on).
bit(7) - always 0,
CHK
Check sum
(cr)
Carriage return
Related command:
$AACINNDD, $AACONNDD, $AACONN
Printed Date: 27 February 2018
103