Programming Manual
58
Programming the telephone dialler
Chapter 22
Programming the telephone dialler
(SmartLoop/PSTN)
In the occurrence of specific events and/or status changes relating to the control panel, groups, zones
and/or devices, the telephone dialler will provide monitoring stations with:
• voices messages over the PSTN line;
• digital messages (e.g. using protocol such as Contact ID, SIA, etc.) over the PSTN line;
• e-mails or IP packages via the SmartLAN
over Internet
.
The telephone dialler recognizes serious control panel faults and emergency conditions, and can be
programmed to transmit the respective information to four pre-set contact numbers.
In the event of PSTN line trouble (line-down conditions), all calls will be switched to the backup
telephone line.
Note:
In order to validate the IMQ-SISTEMI DI SICUREZZA certification, delays relating to the manual
activation of the telephone dialler from a callpoint are not allowed.
22.1 Setting up the Phonebook
FROM COMPUTER
Go to SmartLoop System, Control panel x, SmartLoop/PSTN, System Programming, Telephone
Numbers
This option will allow you to define the contact four numbers that will receive digital/voice calls
generated by events and/or status changes relating to the control panel CPU components.
22.1.1 Parameters
FROM PANEL
Not available.
22.2 Setting up the telephone actions
FROM COMPUTER
Go to SmartLoop System, Control panel x, SmartLoop/PSTN, System Programming, Telephone
Actions
Protocol
This is the reporting protocol used. “Voice” indicates that the call will
be associated with a voice message. “None” indicates that no
telephone calls will be sent to the number concerned. This attribute
can be used to temporarily disable calls to a specific number.
Account Code
This is the code that the Central Station uses to identify the system.
Backup line supervision
If selected, the telephone dialler will check for the presence of the
PSTN backup line.
Tone check
If selected, the device will check the line for the dialing tone before
dialing.
Start voice message after
Voice answer wait window
The telephone dialler will delay the voice message transmission for
the specified time after recognized handshake.
