Programming Manual
28
Programming SmartLoop
Chapter 10
Programming SmartLoop
10.1 The SmartLeague software
The SmartLeague is the SmartLoop system programming software. SmartLeague runs on the installer
company's computer and allow installers to pre-program most of the system parameters without
being connected to the control panel.
Computer to control panel link up is required for uploading and download operations only. The
connection cable must be long enough to reach the mounted device without difficulty. Refer to the
Installation Manual - 7.16 Connecting to a PC or serial printer.
The system programming parameters are considered the system solution. You can save the system
solution to the SmartLeague database and use it for maintenance purposes or as a “model” for other
systems.
10.1.1 The SmartLeague software application layout
The initial page of the SmartLeague application is common to all the products. This page is always
active, even during the programming phase:
[1]
Menu bar and icons for the functions related to the application itself, programming accessories.
[2]
List of recent solutions, which can be used to create new solutions or retrieve existing solutions.
[3]
Documentation installed on the computer.
[4]
Area dedicated to after-sales service: through internet, you can consult the FAQ page and request
information and suggestions via e-mail.
[5]
Access to the area reserved for registered users of the INIM website. By means of a Username and
Password, you can access any upgraded versions of the software, firmware and manuals, and also
newsletters.
Note:
To change the Web address of the page and reconnection interval, select Settings, Application
data, Miscellaneous.
1
2
3
5
4
