Programming Manual
40
Programming the system
The following codes are already active at default:
Refer to the Installation Manual - paragraph 2.5 Operator authorization—access levels.
FROM PANEL
<any key>,
8 Programming, <code>, 7 Access Codes, xxx Code,
or
<any key>,
8 <code> 7 xxx
Press keys
and
to view the other
codes.
Press key to go to the successive field.
Note:
PINs may have 4 or 5 digits.
13.4 Setting up holiday periods
FROM COMPUTER
Go SmartLoop System, System Programming, Holidays
This option will allow you to set specific periods which determine exceptions with regard timer
programming, for example, holidays, bank holidays, etc.
13.4.1 Parameters
FROM PANEL
<any key>,
8 Programming, <code>, 4 TIMER Programming,
2 Holiday list,
or
<any key>,
8 <code> 4 2
Press keys
and
on the first line to
view other holidays.
Press keys and to scroll the
parameters list.
Press keys
and
on the other lines
to change the values.
Level 1
Building occupants
-
-
00001
User
00002
Authorized User
00003
Maintenance
00004
Installer
Day of the
week
Day of the week for weekly arrangements. Valid only if Duration = 1
Day of the
month
Month
Year
Date of the holiday or start date of the holiday period. If you do not wish to specify the day,
month or year, set “--”. For example, to set the 3rd of every month of every year enter:
day=3, month = “--”, year = “--”. If you wish to create the setting using the day of the
week (e.g. Sunday), the day, month and year fields must be left as “--”.
Duration
Duration expressed in days of the holiday period (1 at default).
0 0 1 < C o d e D e s c r i p t i o n >
A c c e s s l e v e l : < l e v e l >
< P I N >
Holiday N u m . 0 1
D A Y : d d
M O N T H : m m
Y E A R : y y
