Programming Manual
Initialising the configuration/programming from panel
23
Press keys and to navigate through
the loops.
7.4.4 Viewing I/O expansion boards
FROM PANEL
<any key>,
8 Programming, <code>, 1 Configuration, 1 View
configuration, 4 Optional cards,
or
<any key>,
8 <code> 1 1 4
7.5
Manual configuration
Manual enrolling from the control panel allows you to work on the configuration parameters of the
loops, Repeaters, I/O expansion boards and the telephone dialler board and on the parameters of the
loop devices.
7.5.1 Adding/Deleting Loops and data changes
FROM PANEL
<any key>,
8 Programming, <code>, 1 Configuration, 2 Modify
Configuration, 2 Manual Configuration, 1 Loop,
or
<any key>,
8 <code> 1 2 2 1
Press keys and
to navigate
through the loops.
Press key on the loop to be configured/
changed.
Press key on Loop Parameters to
access the loop configuration phase.
Note:
For a full description of the parameters, refer to paragraph 17.1 Defining loop typology.
7.5.2 Add/Change device
FROM PANEL
<any key>,
8 Programming, <code>, 1 Configuration, 2 Modify
Configuration, 2 Manual Configuration, 1 Loop,
x Loop, 2 Add/Modify Point,
or
<any key>,
8 <code> 1 2 2 1 x 2
R e p e a t e r n
i n C o n f i g u r a t i o n : Y N
< R e p e a t e r D e s c r i p t i o n >
I / O
i n C o n f i g u r a t i o n : Y E S
1 L o o p 1 < L o o p D e s c r i p t i o n >
2 L o o p 2 < L o o p D e s c r i p t i o n >
3 L o o p 3 N o t a v a i b l e
4 L o o p 4 N o t a v a i b l e
1 L o o p P a r a m e t e r s
2 A d d / M o d i f y P o i n t
3 R e m o v e P o i n t
