Terminal User Guide
Page 78
iWL250 User Guide
Copyright© 2019 Ingenico
Supervisor Sub-Menus
There are three Supervisor sub-menus. They are the Password menu, the Config
menu and the Shortcut menu. They allow access to extended options within the
Supervisor menus.
To access the Password menu press the
Menu
key twice, then choose
SUPERVISOR and press green key. You will be asked to type your current
supervisor password, and confirm this by pressing the green key, and choose
PASSWORD.
Below is a summary of the functions within the Password menu and how to access
them, and what they do.
Some Supervisor functions MUST only be used when instructed
to do so by the terminal Helpdesk.
Password Menu Screen
DELETE ACQ
Deletes all datasets for one or all
acquirers from the terminals memory. Do
not use this feature unless instructed to
do so by the terminal Helpdesk.
MAC RESET
Allows the Message Authentication Code
(MAC) key to be reset to the initial value
for one or all acquirers. Do not use this
feature unless instructed to do so by the
terminal Helpdesk.
TMS RESET
Allows the secure code used for
communications to the TMS to be reset
to the initial value. Do not use this feature
unless instructed to do so by the terminal
Helpdesk.
CHANGE
PWD
Allows the Supervisor password (and/or
Refund code) to be changed. The new
code must be used for all future code
requests.
