Everest XCR - Product manual |
Installation
INGENIA | 2020-10-01 00:04:38
84
1.
2.
3.
For best power and thermal performance
(high current and voltage application), thermal grease, pastes, or
silicone are recommended. The best thermal material tested is ARCTIC MX-4.
Chemtronics CW7250 (white paste
non-conductive) and Chemtronics CW7100 (silver-based, conductive) also offer good results.
Mounting the drive without a thermal interface material is also acceptable for low power applications since any
imperfection on the heatsink or case surfaces will create air bubbles that would reduce the heat transfer.
11.3.2. Front Installation
Front installation can be done using a Flat heatsink together with the thermal tape and 4 x M2.5 x 8 DIN965 screws.
Assemble the drive to the flat heatsink following the Back Installation process.
Use appropriate thermal interface material between the previously cleaned Flat Heatsink and the other
surface.
Screw using M3 screws with appropriate torque according to the base material.
