Infortrend EonStor GS 1000 Gen2 Maintenance Manual Download

Page: 104 / 165

EonStor CS Installation Guide

page 104 / 165

Installation Guide

Name

Description

Local spare

A local spare drive is dedicated to a logical drive. It can be used for replacing any

of the member drives, even across subsystem enclosures, but it cannot be used for

a different logical drive, even if that logical drive resides in the same enclosure.

Global spare

A global spare drive is not dedicated to a specific logical drive. It can be used to

replace any disk drive.

Enclosure spare

An enclosure spare drive is dedicated to the enclosure it resides. It can be used for

a member of any logical drives, as long as it resides in the same enclosure.

Summary of Contents for EonStor GS 1000 Gen2






































































































































































Search results

Summary of Contents for EonStor GS 1000 Gen2

Reviews:

Related manuals for EonStor GS 1000 Gen2

Brands by name

Popular brands

Infortrend EonStor GS 1000 Gen2, Maintenance Manual

Search results

Summary of Contents for EonStor GS 1000 Gen2

Reviews:

Related manuals for EonStor GS 1000 Gen2

Brands by name

Popular brands