Infortrend EonStor GS 1000 Gen2 Maintenance Manual Download

Page: 65 / 165

EonStor CS Installation Guide

page 65 / 165

Installation Guide

1-8.2 How to replace CBM

Note!

Please note that all GSe and GSe Pro series models do not include CBM to replace.

1. Please contact your reseller when there is a hardware component that needs to be replaced.

2. To replace the super capacitor. You need to remove the controller from enclosure. Loosen the screw

(A), lift its side to a 45

angle (B) and then pull to remove from the controller (C).

3. Install the replacement super capacitor to the controller and fasten the screw. Insert the controller back

to enclosure.

Summary of Contents for EonStor GS 1000 Gen2






































































































































































Search results

Summary of Contents for EonStor GS 1000 Gen2

Reviews:

Related manuals for EonStor GS 1000 Gen2

Brands by name

Popular brands

Infortrend EonStor GS 1000 Gen2, Maintenance Manual

Search results

Summary of Contents for EonStor GS 1000 Gen2

Reviews:

Related manuals for EonStor GS 1000 Gen2

Brands by name

Popular brands