Infortrend EonStor GS 1000 Gen2 Maintenance Manual Download

Page: 113 / 165

EonStor CS Installation Guide

page 113 / 165

Installation Guide

2-2.3 Volume

Volume is a logical unit that can be designated for block-level or file-level volumes. The storage resources

of the Pool can be freely assigned to either function. Users can build both types of volumes on the same

Pool. This is one of the key implementations of our unified storage solution.

You can manage the Volumes in GS via EonOne

Settings > Storage > Volumes

You can manage the Volumes with the following actions

Create:

Add a block-level or file-level volume on a pool.

Configure volume:

Edit the existing volume.

Map to host:

Create and edit LUN mapping for block-level volume.

Expand:

Expand the capacity for volume.

Delete:

Delete a shared folder.

Summary of Contents for EonStor GS 1000 Gen2






































































































































































Search results

Summary of Contents for EonStor GS 1000 Gen2

Reviews:

Related manuals for EonStor GS 1000 Gen2

Brands by name

Popular brands

Infortrend EonStor GS 1000 Gen2, Maintenance Manual

Search results

Summary of Contents for EonStor GS 1000 Gen2

Reviews:

Related manuals for EonStor GS 1000 Gen2

Brands by name

Popular brands