Infortrend EonStor GS 1000 Gen2 Maintenance Manual Download

Page: 57 / 165

EonStor CS Installation Guide

page 57 / 165

Installation Guide

1-8. Faulty Hardware Component Replacement

When you encountered any hardware issue, please contact our technical support team for analysis. Once it

has been confirmed as a hardware issue, Infortrend will help to check if the GS is within warranty or not.



If the GS is under warranty, Infortrend will help to arrange replacement or repair of the component.



If the GS is out of warranty, Infortrend will provide quotations of the repair and shipping cost before

arranging it, and if customer accepts the terms and cost, Infortrend will arrange the repair as soon as

possible.

Click

here

to know how to replace Drives.

Click

here

to know how to replace CBM.

Click

here

to know how to replace Controller.

Click

here

to know how to replace Memory Module (DIMM).

Click

here

to know how to replace Host Board.

Click

here

to know how to replace PSU and cooling module (FAN).

Summary of Contents for EonStor GS 1000 Gen2






































































































































































Search results

Summary of Contents for EonStor GS 1000 Gen2

Reviews:

Related manuals for EonStor GS 1000 Gen2

Brands by name

Popular brands

Infortrend EonStor GS 1000 Gen2, Maintenance Manual

Search results

Summary of Contents for EonStor GS 1000 Gen2

Reviews:

Related manuals for EonStor GS 1000 Gen2

Brands by name

Popular brands