Infortrend EonStor GS 1000 Gen2 Maintenance Manual Download

Page: 38 / 165

EonStor CS Installation Guide

page 38 / 165

Installation Guide

Message

Logical drive member drive failed

1st Line Message

Old Message

ID:%.1x Logical Drive ALERT: CHL:%.1d ID:%.1d Drive Failure

Cause

Specific member drive of logical drive failed.

1. User removed the drive.

2. Drive failed.

3. Backplane connection issue.

Action

1. Insert the drive back and rebuild the Logical Drive if needed.

2. Replace the failed drive and engage the logical drive

rebuilding operation manually or automatically to recover logical

drive.

3. If it is still failed after replacing with a new drive, replace the

backplane.

Summary of Contents for EonStor GS 1000 Gen2






































































































































































Search results

Summary of Contents for EonStor GS 1000 Gen2

Reviews:

Related manuals for EonStor GS 1000 Gen2

Brands by name

Popular brands

Infortrend EonStor GS 1000 Gen2, Maintenance Manual

Search results

Summary of Contents for EonStor GS 1000 Gen2

Reviews:

Related manuals for EonStor GS 1000 Gen2

Brands by name

Popular brands