Infortrend EonStor GS 1000 Gen2 Maintenance Manual Download

Page: 8 / 165

EonStor CS Installation Guide

page 8 / 165

Installation Guide

1. System Maintenance

In This Section

How to upgrade, monitoring and maintain the EonStor GS/GSe/GSe Pro/GSa/GSc storage system.

Contents

1-1.

Firmware Update

Upgrade the storage system for new feature and bug fix.

1-2.

Hardware Component LED Status

When storage front end LED, drive tray LED or EonOne event has abnormal status, check here for more

information

1-3.

General GS Status Checking

Outline the process for using EonOne to monitor GS status and how to use Infortrend Service Guide to do

the troubleshooting

1-4.

Individual Drive Status Checking

Outline the step for monitoring the drive status and how to maintain the drive based on different status.

1-5.

Individual Pool Status Checking

Outline the step for monitoring the pool status and how to maintain the pool based on different status.

1-6.

Individual Volume Staus Checking

Outline the step for monitoring the volume status and how to maintain the volume based on different status.

Summary of Contents for EonStor GS 1000 Gen2






































































































































































Search results

Summary of Contents for EonStor GS 1000 Gen2

Reviews:

Related manuals for EonStor GS 1000 Gen2

Brands by name

Popular brands

Infortrend EonStor GS 1000 Gen2, Maintenance Manual

Search results

Summary of Contents for EonStor GS 1000 Gen2

Reviews:

Related manuals for EonStor GS 1000 Gen2

Brands by name

Popular brands