Infortrend EonStor GS 1000 Gen2 Maintenance Manual Download

Page: 162 / 165

EonStor CS Installation Guide

page 162 / 165

Installation Guide

2-4.7 EonCloud Gateway

You can apply Infortrend's EonCloud Gateway to file-level and block-level storage, which supports the most

common file systems, so that you can access the data stored in the cloud via such protocols as NFS, CIFS,

FTP, Rsync, Fiber Channel, and iSCSI.

Note!



EonCloud is a feature requiring a license. Enable the license at Infortrend official website > Product

Service > License Service by downloading the license and uploading it to both the source and the

target GS models via Central EonOne.



EonCloud Gateway supports mainstream cloud providers: Amazon S3, Microsoft Azure, Alibaba Cloud,

OpenStack Swift, Baidu Cloud, and Tencent Cloud.



For more detailed information about EonCloud, please refer to

EonCloud Gateway Application Note

Summary of Contents for EonStor GS 1000 Gen2






































































































































































Search results

Summary of Contents for EonStor GS 1000 Gen2

Reviews:

Related manuals for EonStor GS 1000 Gen2

Brands by name

Popular brands

Infortrend EonStor GS 1000 Gen2, Maintenance Manual

Search results

Summary of Contents for EonStor GS 1000 Gen2

Reviews:

Related manuals for EonStor GS 1000 Gen2

Brands by name

Popular brands