InfoPrint Color 1826 User Manual Download Page 54

Page: 54 / 238

Printing on specialty media

Tips on using letterhead

Page orientation is important when printing on letterhead. Use the following table to determine which direction to

load the letterhead:

Source or process

Print side and paper orientation

•

Standard 250-sheet tray

•

Optional 550-sheet tray

•

Simplex (one-sided) printing

from trays

Printed letterhead design is placed faceup. The top edge of the sheet with the logo

is placed at the front of the tray.

Duplex (two-sided) printing from

trays

Printed letterhead design is placed facedown. The top edge of the sheet with the

logo is placed at the back of the tray.

Note: Check with the manufacturer or vendor to determine whether the chosen preprinted letterhead is acceptable for

laser printers.

Printing

Summary of Contents for Color 1826















































































































































































































































Search results

Summary of Contents for Color 1826

Reviews:

Brands by name

Popular brands

InfoPrint Color 1826, User Manual

Search results

Summary of Contents for Color 1826

Reviews:

Brands by name

Popular brands