manualshive.com logo in svg

InfoPrint Color 1826, User Manual

Share
Download
InfoPrint Color 1826 User Manual Download Page 188

Administrative support

Restoring the factory default settings

Menu settings marked with an asterisk (*) indicate the active settings. You can restore the original printer settings,

often referred to as the 

factory default settings

.

1

Make sure the printer is on and 

Ready

 appears.

2

From the printer control panel, press 

.

3

Press the arrow buttons until 

Settings

 appears, and then press  .

4

Press the arrow buttons until 

General Settings

 appears, and then press  .

5

Press the arrow buttons until 

Factory Defaults

 appears, and then press  .

6

Press the arrow buttons until 

Restore Now

 appears, and then press  .

Submitting changes

 appears briefly.

7

Press 

, and then press 

 until 

Ready

 appears.

The following factory default settings are restored:

•

All downloaded resources in the printer memory are deleted. This includes fonts, macros, and symbol sets.

•

All settings return to the factory default settings except 

Printer Language

 in the Setup menu and custom

settings in the Network and USB menus.

Adjusting Power Saver

1

Make sure the printer is on and 

Ready

 appears.

2

From the printer control panel, press 

.

3

Press the arrow buttons until 

Settings

 appears, and then press  .

4

Press the arrow buttons until 

General Settings

 appears, and then press  .

5

Press the arrow buttons until 

Timeout

 appears, and then press  .

6

Press the arrow buttons until 

Power Saver

 appears, and then press  .

7

Press the arrow buttons to enter the number of minutes for the printer to wait before entering the Power Saver

mode. Available settings range from 1–240 minutes.

8

Press  .

Submitting changes

 appears.

9

Press 

, and then press 

 until 

Ready

 appears.

Administrative support

186

Summary of Contents for Color 1826















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands