InfoPrint Color 1826, User Manual

Page: 210 / 238

C
HECK THE DARKNESS
,
BRIGHTNESS
,
AND CONTRAST SETTINGS
The Toner Darkness setting is too light, the RGB Brightness setting is too light, or the RGB Contrast setting is too
low.
1
From the printer control panel, press .
2
From the
Admin menu
, press the arrow buttons until
Settings
appears, and then press .
3
Press the arrow buttons until
Print menu
appears, and then press .
4
Press the arrow buttons until
Quality menu
appears, and then press .
5
Press the arrow buttons until
Toner Darkness
, RGB Brightness, or
RGB Contrast
appears, and then
press .
6
Change the selected setting to a lower value, and then press .
T
HE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY
•
Load paper from a fresh package.
•
Store paper in its original wrapper until you use it.
C
HECK THE PAPER
Avoid textured paper with rough finishes.
C
HECK THE
P
APER
T
YPE SETTING
Make sure the Paper Type setting matches the paper loaded in the tray.
M
AKE SURE
C
OLOR
S
AVER IS SET TO
O
FF
Color Saver may be set to On.
A
TONER CARTRIDGE MAY BE LOW
When
88 <color> Cartridge Low
appears, order a new cartridge.
A
TONER CARTRIDGE MAY BE DEFECTIVE
Replace the toner cartridge.
T
HE IMAGING KIT MAY BE WORN OR DEFECTIVE
Replace the imaging kit.
Note: The printer has two types of imaging kits: a black and color imaging kit, and a black imaging kit. The black
and color imaging kit contains cyan, magenta, yellow, and black. The black imaging kit contains black only.
Troubleshooting
208