manualshive.com logo in svg

InfoPrint Color 1826, User Manual

Share
Download
InfoPrint Color 1826 User Manual Download Page 185

18

Close the top door.

19

Close the front door.

Cleaning the exterior of the printer

1

Make sure that the printer is turned off and unplugged from the wall outlet.

CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer,

unplug the power cord from the wall outlet and disconnect all cables from the printer before proceeding.

2

Remove paper from the standard exit tray.

3

Dampen a clean, lint-free cloth with water.

Warning—Potential Damage: Do not use household cleaners or detergents, as they may damage the finish of

the printer.

4

Wipe only the outside of the printer, making sure to include the standard exit tray.

Warning—Potential Damage: Using a damp cloth to clean the interior may cause damage to your printer.

5

Make sure the standard exit tray is dry before beginning a new print job.

Maintaining the printer

183

Summary of Contents for Color 1826















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands