InfoPrint 6500-v05, User Manual

Page: 76 / 340

Print Language
PRINT LANGUAGE specifies the set of print languages used by the printer. Refer
to the previous page for print language menus.
v
Standard Print Language (the default)
v
Alternate Print Language . Provides code pages compatible with 6408/6412
Model CT0 printers. Use this option with the 5225 printer emulation.
Specifying a print quality of OCR A or OCR B will change the print language to
OCR A or OCR B.
When OCR A or OCR B is selected as the default print language, OCR A and OCR
B are the only available values for this print quality. If a different print quality
value is desired, the print language must be changed first.
Print Character Table
PRINT CHARACTER TABLE prints out a table of the Twinax interface current
character set.
Character sets are shown in the InfoPrint 6500 Coax/Twinax Programmer’s Reference
Manual .
Active Print Language
ACTIVE PRINT LANGUAGE specifies which print language set will be the active
set.
v
Standard Print Language (the default)
v
Alt Print Language
Twinax Printer Emulation
This parameter defines the printer emulation, as follows:
v
4234-12 (the default)
v 5225
v
4234-2
The 4234-12 selection is only present if the IPDS feature is installed. The 4234-12
selection is the default if the IPDS feature is installed, otherwise, the 4234-2 is the
default.
After the emulation has been changed, a POR status is sent to the host.
Printer Address
PRINTER ADDRESS allows you to set the device address from 0 through 6. The
host directs data and commands on the Twinax line to a specific device based on
its unique device address.
After the address has been changed, a POR status is sent to the host.
60
InfoPrint 6500-V User’s Manual