InfoPrint 6500-v05, User Manual

Page: 196 / 340

Auto LF
The Auto LF option defines the printer action when print data is received past the
forms width setting.
v
Enable (the default). Performs an automatic carriage return and line feed when
data is received past the forms width.
v
Disable . Discards any data past the forms width.
Overstrike
This option enables you to print bold characters.
v Enable (the default). Turns on bold print. When enabled, overstrike printing
slows down the printer.
v
Disable . Turns off bold print.
Define LF Code (Line Feed)
v
LF = LF (the default). Does not perform an automatic carriage return when a
line feed command is received. The next print position will be the current print
position of the next line.
v
LF = CR + LF . Forces an automatic carriage return with each line feed command
received. The next print position is print position 1 of the next line.
Printer Select
v
Disable (the default). Ignores the ASCII DC1 and DC3 control codes.
v Enable
. Disables the printer when a DC1 control code is received, and enables
the printer when a DC3 control code is received.
Alternate Set 80-9F
v
Control Code (the default). Interprets data in the range of X'80' through X'9F' as
a control code.
v
Printable . Prints data in the range of X'80' through X'9F'.
180
InfoPrint 6500-V User’s Manual