LP630 Service Manual
37
9
To remove the engine fan cable, flex the power supply and ballast apart slightly so you can slide
the cable from between them. Note the cable routing.
Assembly Notes
♦
When you place the engine inside the bottom case, make sure that the lamp power connector is in
place and that the engine fan cable emerges from between the engine and power supply.
♦
Make sure the engine seats properly. There are registration pins that fit into holes adjacent to the two
outside screws. Once the pins are in the holes, the engine is properly seated.
♦
Make sure that you properly route all cables. See the illustrations above.
Summary of Contents for LP630
