LP630 Service Manual
13
Remove and Replace the Top Case
The top case houses the keypad, the access to the lamp and a sensor that indicates that the lamp door is
in place.
1
Turn the projector on its side. Then use a #1 Phillips screwdriver to remove the five 4x10 self-
tapping screws from the recessed openings on the bottom case..
2
Place the projector on its bottom. Use a #1 Phillips screwdriver to remove the two black 3x8
screws from the rear of the projector.
Summary of Contents for LP630
