LP630 Service Manual
12
Replace the rubber feet
1
Place the projector upside down on the work surface.
Note that the rubber foot on the bottom case and the elevator are identical.
2
Remove the black M3x10 Phillips screw that fastens the rubber foot to the bottom case or to the
elevator shaft.
3
When you replace the rubber foot, do not over tighten the screw.
Summary of Contents for LP630
