LP630 Service Manual
56
Remove and Replace the Projection Lens
The projection lens (306-0057-xx) attaches to the front of optical engine and allows focusing and sizing of
an image on the screen.
1
Remove the following items:
Top case (see page 13)
Controller ECA (see page 16)
Optical engine (see page 34)
Zoom and focus rings (see page 54)
2
Using a #1 Phillips screwdriver remove the four M3x8 machine screws that attach the lens to the
optical engine. Set aside the four washers for assembly.
3
Gently pull the lens away from the optical engine.
Assembly Notes:
♦
Replace the washers over the screw holes on the optical engine before mounting the lens
♦
Align the three holes in the lens flange with the pins on the optical engine.
Summary of Contents for LP630
