16
6. Conveyor
Figure 15: Extended Conveyor
6.1. Extended Conveyor Belts
Note:
Only the 7K Plus is equipped with the extended conveyor, the 7K is equipped with the standard conveyor which
does not contain the additional conveyor table and belts.
a)
Removal
•
Disconnect
the
power cord
from the machine.
1. Remove the
E-clips
on both the
idler shafts
(8x).
2. Remove the
springs
from both
idler shafts.
Note:
Different size springs are used for the intermediate idler shaft and for the final idler shaft.
3. Remove the
feet
from the
final idler shaft
.
4. Slide and orient the
final idler shaft
in table slot to allow for removal and slide the shaft out of the table.
5. Remove the
extended conveyor arm
from one side of the
extended conveyor
.
6. Slide and orient
intermediate idler shaft
in the table slot
to allow for remove and then slide it out of the table.
7. Remove the
conveyor belts
.
b)
Installation
1. Place the
conveyor belts
around the rolls on both
conveyor tables.
2. Place the
extended table
near the
conveyor table
and
insert the
intermediate shaft
into the
table
, making sure
Figure 16: Conveyor
Summary of Contents for 7K Plus
