11
2.3. Double Sided Timing Belt and Drive Pulleys
a)
Removal
•
Disconnect
the
power cord
from the machine.
1. Remove the
conveyor pulley
,
motor belt
and the
gears
. (See Section 2.2)
2. Remove the
double sided belt
.
a) Loosen the
idler tension bracket
and slide the bracket and pulley down to release tension on the belt.
b) Remove the
idler pulley
from the bracket.
Note:
The
pulley
uses a double screw attachment and both sides must be held to unscrew the screws.
3. Remove the
roll pulleys
.
a) Loosen the set screws and remove the
pulleys
.
4. Remove the
belt.
b)
Installation
1. Installation is the reverse of removal.
Summary of Contents for 7K Plus
