25
Table 3.2 Configuration applications
App
RGX Configuration
Interface
iNet software
Supported settings
RGX-iNet communication (cellular, Wi-Fi, and
Ethernet)
Yes No
LENS Wireless (group and encryption key)
No
Yes
Other (GPS, data upload intervals, communication
priority, etc.)
No Yes
Accessing and using the RGX Configuration Interface app
If the unit's communication setting will be cellular
only
, then you do
not
need to access or complete any
work in the RGX Configuration Interface; skip to
Figure 3.5 iNet settings.
There are two methods for accessing the RGX Configuration Interface—through a Wi-Fi or Ethernet
connection. Supplies required for each access method are listed below.
Table 3.3 Supplies needed for configuration
Access method
Item Wi-Fi
Ethernet
Torx screwdriver with a T25 bit
No
Yes
Ethernet cable Cat5 or greater
No
Yes
Computer (with browser)
No
Yes
Smart device (with browser)
Yes (or computer)
No
RGX Serial Number (S/N)
Yes
Yes
Access to iNet
Yes
Yes
When using the RGX Configuration Interface, the following apply.
x
If you are not familiar with your company's communication operations, see your network administrator
for assistance.
x
If your company’s wireless security network is “WPA2-Enterprise”, the RGX Interface will require the
upload of a
certificate of authenticity
that is 2048-bit or less and supplies the full chain of trust.
x
As with most applications, the Interface is subject to timing out when idle.
x
When a data field appears in gray,
no
entry is required.
x
Within each section, work from top to bottom.
x
When a "test" button appears, use it
after
entering all the required values that precede it; then, follow
any on-screen instruction to learn of and correct for any invalid or missing values.
Based on your access method, Wi-Fi or Ethernet, complete
only one
of two possible instruction sets as
indicated below.
Document Number: 0000037533
DO NOT CHANGE WITHOUT THE FOLLOWING AGENCY APPROVALS(S):N/A
Modified: 2018-05-25 13:18:14 EDT
State:In Work
INDUSTRIAL SCIENTIFIC CORPORATION
Title: PRODUCT MANUAL RGX GATEWAY-EN-1
Eng:
Drawing No: 17158071-1
Drawn By: Gaygan, Nancy
Created: 2018-05-16 10:24:51 EDT
Rev: 1
Printed By: Kuzmich, Bob
Int: 1.5
Date:May 29, 2018
