Industrial Scientific RGX Product Manual Download Page 29

Page: 29 / 62

Log into iNet and follow this navigation.

Click on the

iNet Now

tab.

Choose

iNet Now Activations

Use the serial number search box to locate an instrument.

A check mark an item’s

Activated

check-mark box indicates an instrument is activated for live

monitoring.

Charge

Using

only

the supplied RGX charging power supply and power cord, charge the unit's installed battery as

shown and described below.

Nonhazardous location

Charging power supply port

Indicator light (charging
status)

Charging power supply and

power cord

─

Connect the charging power
supply to its power cord.

Uncap the unit's charging
power supply port: turn the
port cap counterclockwise to
expose the port for use.

Connect the power-supply cable to the port and turn its swivel
cover clockwise (approximately 45°) until it clicks closed or a
full-stop connection feedback is felt.
Plug the power cord into a compatible outlet.

Document Number: 0000037533
DO NOT CHANGE WITHOUT THE FOLLOWING AGENCY APPROVALS(S):N/A

Modified: 2018-05-25 13:18:14 EDT

State:In Work

INDUSTRIAL SCIENTIFIC CORPORATION

Title: PRODUCT MANUAL RGX GATEWAY-EN-1
Eng:

Drawing No: 17158071-1

Drawn By: Gaygan, Nancy

Created: 2018-05-16 10:24:51 EDT

Rev: 1

Printed By: Kuzmich, Bob

Int: 1.5

Date:May 29, 2018

Summary of Contents for RGX































































Search results

Summary of Contents for RGX

Reviews:

Brands by name

Popular brands

Industrial Scientific RGX, Product Manual

Search results

Summary of Contents for RGX

Reviews:

Brands by name

Popular brands