DS2 Docking Station
Getting Started
Version 9.1 (P/N: 17112798)
INDUSTRIAL SCIENTIFIC
65
Step Instruction
3.
Prepare the IDS to accept the static addressing.
Connect a serial cable between the PC com1 port and the DB9 connector on the
back of the IDS.
Power the docking station and monitor the information flow on HyperTerminal.
Within 5 seconds of powering the docking station, hit the enter key on the
computer keyboard.
If successful, HyperTerminal will display the prompt BL>.
You are ready to enter the line of text which will program the IDS with the
desired addressing.
4.
Apply the Addressing to the IDS.
Highlight the entire line of text entered into notepad.
Figure 3-28. Selecting the Prepared IDS Text for Copying
Use CTRL-C to copy this line into the buffer.
Within the HyperTerminal window, choose EDIT / PASTE TO HOST.
Figure 3-29. Pasting the IDS Text
Within the HyperTerminal window, type the word EXIT and hit enter.
Wait for the Docking Station to restart on its own. At this point, it has completed
the programming of the addresses.
