manualshive.com logo in svg

Industrial Scientific DS2 Docking Station, Administrator'S Manual, Page: 217 / 280

Share
Download
Industrial Scientific DS2 Docking Station Administrator'S Manual Download Page 217

DS2 Docking Station 

 

Basic Operation of the DS2 

Version 9.1 (P/N:  17112798) 

INDUSTRIAL SCIENTIFIC

 207 

service or seriously degrades, obstructs, or repeatedly interrupts a licensed radio communications 
service.  Radio communications services include but are not limited to AM/FM commercial 
broadcast, television, cellular services, radar, air-traffic control, pager, and Personal 
Communication Services (PCS).  These licensed services, along with unintentional radiators 
such as digital devices, including computer systems, contribute to the electromagnetic 
environment.   

7.8.6. Wiring 

Requirements 

Voltage used must be the same as specified on this device (120/240 VAC) or 12VDC.  Using a 
higher voltage is dangerous and may result in a fire or other accident causing device damage.  
Using a lower voltage will cause unexpected results.  Industrial Scientific is NOT responsible for 
damage resulting from improper use of an IDS.   

 

 

  

  

 

 

 

 

 

 

Summary of Contents for DS2 Docking Station

























































































































































































































































































Reviews:

No comments