manualshive.com logo in svg

Industrial Scientific DS2 Docking Station, Administrator'S Manual, Page: 15 / 280

Share
Download
Industrial Scientific DS2 Docking Station Administrator'S Manual Download Page 15

DS2 Docking Station 

 

Introduction to the DS2 Docking Station 

Version 9.1 (P/N:  17112798) 

INDUSTRIAL SCIENTIFIC

 5 

 

Figure 2-2.  Sample Docking Station Network 

 

2.3.2.  Docking Station Server Admin Console (DSSAC) Overview 

The Docking Station Server Admin Console (DSSAC) is a Windows

-based application that is 

used to manage the DS2 Docking Station system.  The DSSAC is used to manage instrument 
data, view IDS status, and manage Docking Station Server configurations.   

Before using the DSSAC for the first time, read Chapter 3 Getting Started for an overview of the 
application’s user interface.  Chapter 4 contains information about setting up and using IDSs.   

Summary of Contents for DS2 Docking Station

























































































































































































































































































Reviews:

No comments