Industrial Scientific DS2 Docking Station, Administrator'S Manual, Page: 171 / 280

DS2 Docking Station

Configuring Instruments
Version 9.1 (P/N: 17112798)
INDUSTRIAL SCIENTIFIC
225
NOTE: If two sensors are installed in the Tango TX1 when the data are logged, DS2 will
download data for three sensors. Data from the installed sensors are logged and downloaded as
sensor 1 and sensor 2. Data that are logged and downloaded as sensor 3 (or VIRTUAL) are
algorithm-calculated values that are based on sensor 1 and sensor 2 data. DSSAC displays only
the VIRTUAL data.
If only one sensor is installed or working when the data are logged, the downloaded and
DSSAC- displayed data will contain only information for that sensor.
5.16. Edit Instrument – Manage Events Tab
The Manage Events tab of the Edit Instrument screen displays the journal events for the current
instrument. The Manage Events tab has a Journal Entries frame and a Force Event frame. The
contents of this tab are explained below.
Figure 5-43. Edit Instruments – Manage Events Tab
Table 5-17. Components of the Manage Events Tab of the Edit Instrument Screen
Element Description
Force Event frame Inside the Force Event frame will be a drop-down list of all the possible
events which may be forced and a button which will force the selected
event.
Event Code Drop-
down The Event Code selection drop-down box lists the available events for
that instrument. It also includes a “None” as the first entry.
The drop-down element “
all the possible events ” is defined as any event
that has been performed by the instrument and now has a journal entry.