DS2 Docking Station
Configuring
Instruments
Version 9.1 (P/N: 17112798)
INDUSTRIAL SCIENTIFIC
183
Step Instruction
9.
The Edit Sensor dialog box contains three tabs.
Tab Description
Sensor
Displays general sensor information. See the table below for an
explanation of the fields on the Sensor tab.
Calibrations
Used to display results of calibration tests specific to the sensor.
See Calibrations for more information about viewing the data on
the Calibrations tab.
Bump Tests
Used to display results of bump tests specific to the sensor. See
Bump Tests for more information about viewing the data on the
Bump Tests tab.
10.
Click the OK button to close the Edit Battery or Edit Sensor dialog box.
Table 5-4. Fields in the Edit Battery Dialog Box
Field Description
Serial Number
The serial number of the battery.
Type
The battery type.
Part Number
The part number for the battery.
Manufacturer
The manufacturer of the battery, e.g., Industrial Scientific Corporation.
Install Date
The date that the battery was first installed in the instrument. For
Docking Station compatible instruments, this is the date that the DSS
first detected the battery. For legacy instruments, it is the date that the
battery was added using the DSSAC application.
Operation Minutes
The number of minutes that the battery has been in use.
NOTE:
The battery screens are grayed out (and therefore may not be edited) for dockable
instruments.
Table 5-5. Fields in the Edit Sensor Dialog Box (Sensor Tab)
Field Description
Serial Number
The serial number of the sensor.
Type
The sensor type, e.g., Chlorine Sensor, Carbon Monoxide Sensor.
Part Number
The part number for the sensor.
Manufacturer
The manufacturer of the sensor, e.g., Industrial Scientific Corporation.
