Impulse Dynamics AIM HIGHer OPTIMIZER Patient Manual Download Page 21

Page: 21 / 66

6.6

Charging Your Vesta Charger

Note:

Charging your Vesta Charger

and charging your

OPTIMIZER Smart Mini

IPG

CAN

NOT be done at the same time.

Always

charge the internal

battery of your

Vesta Charger

before

attempting to charge

the battery of

your OPTIMIZER Smart Mini

IPG

Note:

Inspect the

AC Adapter

for any damage before each use.

Contact your

doctor

if a replacement

AC Adapter

is needed.

Warning:

Only use the

AC Adapter

provided with your

Vesta

Charger to charge the battery in your

Vesta Charger.

therwise damage to

your Vesta Charger may result.

To connect the

AC Adapter

to your Vesta Charger

and begin

charging its internal battery, perform the following steps:

1. Turn your Vesta Charger

around so that the b

ack of the

Charger is facing up.

2. Remove the protective cover flap

from the power inp

connector located next to the base of the charging wand

cable

See Figure 7

Figure 7: Back of the Charger

Protective

Flap

Power Input

Connector

Summary of Contents for AIM HIGHer OPTIMIZER



































































Search results

Summary of Contents for AIM HIGHer OPTIMIZER

Reviews:

Related manuals for AIM HIGHer OPTIMIZER

Brands by name

Popular brands

Impulse Dynamics AIM HIGHer OPTIMIZER, Patient Manual

Search results

Summary of Contents for AIM HIGHer OPTIMIZER

Reviews:

Related manuals for AIM HIGHer OPTIMIZER

Brands by name

Popular brands