Impulse Dynamics AIM HIGHer OPTIMIZER, Patient Manual, Page: 26 / 66

20
5. When your Vesta
Charger has successfully completed
downloading the data, it will display the IPG Data
Download Success
screen
accompanied by 3 short
beeping tones.
The flashing checkmark in
dicates that
your Vesta
Charger was able to successfully able to
download information from your implanted device.
See
Figure 14 .
Figure 14: IPG Data Download Success Screen
6. After the data download has been completed
, the
Charging
IPG Status screen will be displayed, indicating
that your Vesta
Charger has begun
actively charging your
OPTIMIZER Smart Mini IPG
. See Figure 15 .
The Coupling Level icon (
) at the center of the
Charging IPG Status
screen
will show anywhere from
zero to four illuminated bars.
Reposition the charging
wand until at least two bars
of the Coupling Level icon are
illuminated.
Figure 15: Charging IPG Status Screen
Note: Zero
illuminated bars on the Coupling Level icon
accompanied by an audible beeping tone indicates p
oor
placement of the charging wand
. If
the charging wand is
not repositioned onto
your implant site
within 20 seconds,
your Vesta Charger
will emit 3 long beeping tones
,
display
the
Charging IPG Coupling Error
screen (see Figure 16
)
,
and then
shut off. If this occurs, press the Power Button
again to initiate
a new charging
session.